PROE PROJECTS Online Training in India

PROE PROJECTS Online Training in Hyderabad India

PROE PROJECTS Online Training in Hyderabad India

PROE PROJECTS Online Training in Hyderabad India : This is for the people who want to be in the top 10% of all the people who learn similar software. This will improve the job chances from 10% to 90% when you attend a job on this software.

PROE (Pro/Engineer) is a powerful 3D modeling software used by engineers and designers for product design and development. As with any software, it can take time and effort to master, but with the right training, anyone can learn to use it effectively. This is where PROE Projects Online Training in India can come in handy.

PROE Projects Online Training in Hyderabad India offers comprehensive training on how to use PROE software effectively, covering everything from the basics of 3D modeling to advanced techniques for complex product design. The training is conducted online, allowing participants to learn at their own pace and from the comfort of their own home or office.

The training is designed to be practical and hands-on, with participants working on real-world projects that simulate the challenges and complexities of product design. This not only helps participants to develop their skills and knowledge but also prepares them for the real-world challenges they are likely to face in their professional careers.

About Course
Pro/E or Creo or CATIA or UG or Solidworks is learnt by almost all Mechanical engineers. Out of 10 Jobs available in the Solid Modeling/ Product design areas, one receives over 500 applications. Of these 500 Engineers, about 60% will not be good in basics of ‘Engineering drawing and Machine drawing’ subjects. So, they get disqualified straight away as they don’t have 3D visualization skills and cannot draw even the missing views or sections views. Of, the remaining 40% engineers, 20% people will be relatively weak in Pro/Engineer software and will fail in the practical test. So, finally there are 10% people who are good both on the subject and also the software. Now, in the final 50 short listed engineers, there are only 10 jobs. This is where, doing this projects course will come to your rescue. When compared to a person who has done just the course, training along with so many modeling projects will give that cutting edge skills required to crack the interview. Its simple. What we say is “learning more than others” is the only way to get a Job.

PROE PROJECTS Course Content

Course Syllabus : 215 Lessons                                               Course Duration : 20:46:36 Hrs

Topic No. of Lessons Duration
AIR COCK ASSEMBLY PROJECT 6 Lessons 00:42:35 Hrs
1. AIROFF COCK PROJECT PICS 00:02:54
2. AIRCOCK PART 1 to  AIRCOCK PART 6
BEARING ECCENTRIC ASSEMBLY PROJECT 14 Lessons 01:13:03 Hrs
1. ECCENTRIC PROJECT PICS 00:03:13
2. ECCENTRIC PART 1A 00:07:26
3. ECCENTRIC PART 1B 00:09:05
4. ECCENTRIC PART 2A 00:08:45
5. ECCENTRIC PART 2B 00:02:51
6. ECCENTRIC PART 3 00:03:09
7. ECCENTRIC PART 4 00:03:54
8. ECCENTRIC PART 4A 00:01:42
9. ECCENTRIC PART 4B 00:01:38
10. ECCENTRIC PART 5A 00:01:47
11. ECCENTRIC PART 5B 00:01:48
12. ECCENTRIC PART 5C 00:04:20
13. ECCENTRIC PART 6 00:10:31
14. BEARING ECCENTRIC ASSEMBLY 00:12:54
BLOW OFF COCK ASSEMBLY PROJECT 6 Lessons 00:43:44 Hrs
1. BLOW OFF COCK PROJECT PICS 00:03:06
2. BLOW OFF COCK PART 1 to BLOW OFF COCK PART 400:03:57
6. BLOW OFF COCK ASSEMBLY 00:06:57
BUSHED PIN TYPE FLAGED COUPLING ASSEMBLY PROJECT 8 Lessons 00:43:18 Hrs
1. BUSHED PIN TYPE PROJECT PICS 00:03:17
2. BPTFC PART 1 to BPTFC PART 6
8. BUSHED PIN FLANGED COUPLING ASSEMBLY 00:11:52
C-CLAMP ASSEMBLY PROJECT 9 Lessons 00:49:47 Hrs
1. C-CLAMP ASSEMBLY PROJECT PICS 00:03:32
2. C-CLAMP PART 1 to C-CLAMP PART 7
9. C-CLAMP ASSEMBLY 00:10:08
CRANE HOOK ASSEMBLY PROJECT 13 Lessons 01:07:17 Hrs
1. CRANE HOOK PROJECT PICS 00:04:19
2. CRANE HOOK PART 1 to CRANE HOOK PART 10
13. CRANE HOOK ASSEMBLY 00:13:06
CROSS HEAD ASSEMBLY PROJECT 9 Lessons 00:48:45 Hrs
1. CROSSHEAD PROJECT PICS 00:03:26
2. CROSSHEAD PART 1 to CROSSHEAD PART 7
9. CROSS HEAD ASSEMBLY 00:08:04
FOOT STEP BEARING PROJECT 7 Lessons 00:48:19 Hrs
1. FOOT STEP BEARING PROJECT PICS 00:02:52
2. FSB PART 1 to FSB PART 5
7. FOOT STEP BEARING ASSEMBLY 00:07:13
FUEL INJECTOR PROJECT 12 Lessons 00:59:19 Hrs
1. FUEL INJECTOR PROJECT PICS 00:03:40
2. FUEL INJECTOR PART 1 to FUEL INJECTOR PART 10
12. FUEL INJECTOR ASSEMBLY 00:11:07
GATE VALVE ASSEMBLY PROJECT 10 Lessons 01:04:49 Hrs
1. GATE VALVE PROJECT PICS 00:02:49
2. GATE VALVE PART 1 to GATE VALVE PART 8
10. GATE VALVE ASSEMBLY 00:08:39
LATHE TAIL STOCK ASSEMBLY PROJECT 14 Lessons 01:08:22 Hrs
1. LATHE TAIL STOCK PROJECT PICS 00:02:52
2. LATHE TS PART 1 to LATHE TS PART 10
14. LATHE TAIL STOCK ASSEMBLY 00:13:37
MACHINE VICE ASSEMBLY PROJECT 12 Lessons 01:09:52 Hrs
1. MACHINE VICE PROJECT PICS 00:03:32
2. MACHINE VICE PART 1 to MACHINE VICE PART 10
12. MACHINE VICE ASSEMBLY 00:13:50
MILLING MACHINE TAIL STOCK ASSEMBLY PROJECT 9 Lessons 00:48:41 Hrs
1. MILLING MACHINE TAIL STOCK PICS 00:04:07
2. MMTS PART 1 to MMTS PART 7
9. MILLING MACHINE TAIL STOCK ASSEMBLY 00:09:46
OLD HAM COUPLING ASSEMBLY PROJECT 6 Lessons 00:29:14 Hrs
1. OLD HAM COUPLING PROJECT PICS 00:03:11
2. OLD HAM PART 1 to OLD HAM PART 4
6. OLDHAM COUPLING ASSEMBLY 00:08:16
PETROL ENGINE ASSEMBLY PROJECT 6 Lessons 00:31:03 Hrs
1. PETROL ENGINE PISTON PROJECT PICS 00:03:20
2. PEP PART  to PEP PART 4
6. PETROL ENGINE PISTON ASSEMBLY 00:07:27
PLUMMER BLOCK PROJECT 6 Lessons 01:07:24 Hrs
1. PLUMMER BLOCK PROJECT PICS 00:02:55
2. PLUMMER PART 1 to PLUMMER PART 5
6. PLUMMER BLOCK ASSEMBLY 00:07:49
PROTECTED FLAGED COUPLING PROJECT 9 Lessons 00:50:57 Hrs
1. PROTECTED FLANGED COUPLING PROJECT PICS 00:03:20
2. PFC PART 1 to PFC PART 6
9. PROTECTED FLANGED COUPLING ASSEMBLY 00:12:06
RADIAL ENGINE SUB ASSEMBLY PROJECT 12 Lessons 01:10:09 Hrs
1. RADIAL ENGINE PICS 00:03:13
2. RADIAL ESA PART 1 to RADIAL ESA PART 10
12. RADIAL ENGINE SUB ASSEMBLY 00:16:45
REVOLVING CENTER ASSEMBLY PROJECT 12 Lessons 01:00:13 Hrs
1. REVOLVING CENTER PROJECT PICS 00:03:24
2. REV CENTER PART 1A to REV CENTER PART 1C
5. REV CENTER PART 2 to REV CENTER PART 8
12. REVOLVING CENTER ASSEMBLY 00:09:52
SPIGOT AND SOCKET ASSEMBLY PROJECT 5 Lessons 00:24:51 Hrs
1. COTTER JOINT PROJECT PICS 00:03:22
2. SS PART 1 to SS PART 3
5. SOCKET & SPIGOT JOINT ASSEMBLY 00:04:27
SQUARE TOOL POST ASSEMBLY PROJECT 14 Lessons 01:09:13 Hrs
1. SQUARE TOOL POST PROJECT PICS 00:03:47
2. SQ TOOL POST PART 1 to SQ TOOL POST PART 11
13. SQUARE TOOL POST ASSEMBLY 1 00:06:53
14. SQUARE TOOL POST ASSEMBLY 2 00:08:33
STEAM ENGINE CROSS HEAD ASSEMBLY PROJECT 7 Lessons 00:47:37 Hrs
1. STEAM ENGINE CROSS HEAD PROJECT PICS 00:04:27
2. SECH PART 1 to SECH PART 5
7. STEAM ENGINE CROSS HEAD ASSEMBLY 00:08:54
STUFFING BOX ASSEMBLY PROJECT 9 Lessons 01:08:04 Hrs
1. STUFFING BOX PROJECT PICS 00:03:21
2. STUFFING PART 1 to STUFFING PART 6
9. STUFFING BOX ASSEMBLY 00:07:51

Click for more details :

PROE PROJECTS Online Training in India

Click for related courses : 

UNIGRAPHICS Online Training in India

Our Other Courses :

Duration Course Actual Fee Discount Fee
06:30:04 Hrs SOLIDWORKS  ₹8000 ₹3200
03:58:59 Hrs PRIMAVERA ₹12000 ₹3600
02:11:46 Hrs QUANTITY SURVEYING ₹16000 ₹8000
11:31:42 Hrs CATIA ₹8000 ₹3200
23:06:03 Hrs CREO ₹8000 ₹3200
02:12:22 Hrs HYPERMESH ₹5000 ₹2500
03:13:08 Hrs ANSYS WORKBENCH ₹6000 ₹3000
23:38:59 Hrs AUTOCAD(2D&3D) ₹5000 ₹1000
04:02:45 Hrs FOUR REALTIME PROJECTS USING STAAD STRUCTURAL SOFTWARE ₹4000 ₹2000
03:52:36 Hrs FOUR REALTIME PROJECTS USING ETABS STRUCTURAL SOFTWARE ₹4000 ₹2000
11:40:26 Hrs STAAD PRO LEVEL 1 ₹5000 ₹2500
07:12:29 Hrs STAAD PRO LEVEL 2 ₹5000 ₹2500
00:00:00 Hrs SAP & SAFE ₹10000 ₹3000
11:39:30 Hrs ETABS STRUCTURAL ₹10000 ₹3000
16:33:19 Hrs UNIGRAPHICS ₹8000 ₹3200
09:58:50 Hrs CATIA PROJECTS ₹6000 ₹3000
03:58:01 Hrs CREO PROJECTS ₹6000 ₹3000
08:43:47 Hrs UNIGRAPHICS PROJECTS ₹1800 ₹900
04:23:46 Hrs 3DS MAX 2011 ₹5000 ₹2000
20:46:36 Hrs PROE PROJECTS ₹4800 ₹2400
06:44:22 Hrs 3DS MAX 2014 ₹5000 ₹2500

For more details on Cad Courses :

Visit : www.eccindia.org

Call : +91 9703331068